LIN Serial Analyzer User’s Guide Rev2.0
3.3
TRANSACTION WINDOW
This window, shown in Figure 3-1, constantly monitors and display bus traffic when in
the “Display All” mode. Any message frames seen on the bus are shown, regardless of
the source.
The data is displayed as it is seen on the bus without modification.
This section describes the window’s fields.
FIGURE 3-1:
MESSAGE FRAMES DISPLAY
3.3.1
TimeStamp
This field of the Transaction window displays the time, in seconds, since the last frame
was received. The value is reset to zero when the window is cleared.
The value can also be cleared by clicking on the “TimeStamp” column label.
3.3.2
ID (Identifier)
This field displays the ID byte, including the upper two parity bits.
3.3.3
Data
From zero to eight data bytes are displayed in this field. The data is in the hexadecimal
format (without the leading characters, ‘0x’), with the bytes separated by spaces.
3.3.4
Checksum
The last field of a frame is the checksum. The checksum contains the inverted, eight-bit
sum with carry, over all data bytes or all data bytes and the protected identifier.
3.3.5
ChkSumType
This field indicates whether a “classic” or “enhanced” equation was used for the check-
sum calculation. For messages sent via the Master Message group box, the type of
calculation is configured in the checksum portion of the Master Message group box
(see Section 3.8.3 “Checksum Group” ).
? Classic – Checksum calculation over the data bytes only. Used for the master
request frame, slave response frame and communications with LIN 1.x slaves.
An eight-bit sum with carry is equivalent to the sum of all values and subtracts
255 every time the sum is greater than or equal to 256.
? Enhanced – Checksum calculation over the data bytes and the protected identifier
byte. Used for communication with LIN 2.x slaves.
The checksum is calculated both ways when a message frame is received. A match is
displayed either as “Classic” or “Enhanced”. If neither result matches the incoming
data, “ERROR” is displayed.
3.3.6
Baud
This field shows the actual, calculated bit rate observed during the Auto-Baud Detect
period of the current frame.
DS51675B-page 12
? 2008 Microchip Technology Inc.
相关PDF资料
ARE0810KS04 SWITCH DIP SPST EXTENDED 8POS SM
AS-SYNC SYNC CBL-ARBSTUDIO WAVEFORM GEN
AS1104D GEN 125MHZ 4 + 36CH 16BIT 1GS/S
AS201801 ACTUATOR MAGNET MINI/FLANGE MNT
AS201901 ACTUATOR MAGNET FLANGE MNT
AS24AV SW SLIDE SP3T .098" VRT BRKT PCB
ASA1-100.000MHZ-L-T OSC 100.000 MHZ 2.5V SMD
ASD3-20.000MHZ-ECT OSCILLATOR 20.000 MHZ 1.8V SMD
相关代理商/技术参数
APGDT002 功能描述:界面开发工具 CAN Bus Analyzer RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V
APGF0606VGTPBTSEETC 功能描述:LED RGB 0606 SMD 制造商:kingbright 系列:HELI Colour 包装:剪切带(CT) 零件状态:在售 颜色:红色,绿色,蓝色(RGB) 配置:共阳极 透镜颜色:无色 透镜透明度:透明 毫烛光等级:30mcd 红色,90mcd 绿色,20mcd 蓝色 透镜样式/尺寸:方形,带平顶,0.65mm 电压 - 正向(Vf)(典型值):1.95V 红色,3V 绿色,2.9V 蓝色 电流 - 测试:5mA 红色,5mA 绿色,5mA ??? 视角:140° 安装类型:表面贴装 波长 - 主:624nm 红色,527nm 绿色,467nm 蓝色 波长 - 峰值:632nm 红色,518nm 绿色,461nm 蓝色 特性:- 封装/外壳:4-SMD,无引线 供应商器件封装:4-SMD 大小/尺寸:0.65mm 长 x 0.65mm 宽 高度(最大值):0.25mm 标准包装:1
APGF0808VGTPBTSEETC 功能描述:LED RGB 0808 SMD 制造商:kingbright 系列:HELI Colour 包装:剪切带(CT) 零件状态:在售 颜色:红色,绿色,蓝色(RGB) 配置:共阳极 透镜颜色:无色 透镜透明度:透明 毫烛光等级:30mcd 红色,90mcd 绿色,20mcd 蓝色 透镜样式/尺寸:方形,带平顶,0.80mm 电压 - 正向(Vf)(典型值):1.95V 红色,3V 绿色,2.9V 蓝色 电流 - 测试:5mA 红色,5mA 绿色,5mA ??? 视角:130° 红,150° 绿,150° 蓝色 安装类型:表面贴装 波长 - 主:624nm 红色,527nm 绿色,467nm 蓝色 波长 - 峰值:632nm 红色,518nm 绿色,461nm 蓝色 特性:- 封装/外壳:4-SMD,无引线 供应商器件封装:4-SMD 大小/尺寸:0.80mm 长 x 0.80mm 宽 高度(最大值):0.25mm 标准包装:1
APGF1011SEEPBVGC-TT 功能描述:Red, Green, Blue (RGB) 624nm Red, 527nm Green, 467nm Blue LED Indication - Discrete 2V Red, 3V Green, 2.9V Blue 0404 (1010 Metric) 制造商:kingbright 系列:- 包装:剪切带(CT) 零件状态:有效 颜色:红,绿,蓝(RGB) 透镜颜色:无色 透镜透明度:透明 毫烛光等级:30mcd 红,80mcd 绿,23mcd 蓝 透镜样式/尺寸:方形,带平顶,1.00mm 电压 - 正向(Vf)(典型值):2V 红,3V 绿,2.9V 蓝 电流 - 测试:5mA 红,5mA 绿,5mA 蓝 视角:130° 红,150° 绿,150° 蓝 安装类型:表面贴装 波长 - 主:624nm 红,527nm 绿,467nm 蓝 波长 - 峰值:632nm 红,518nm 绿,461nm 蓝 特性:- 封装/外壳:0404(1010 公制) 供应商器件封装:4-SMD 大小/尺寸:1.00mm 长 x 1.00mm 宽 高度(最大值):0.25mm 标准包装:1
APGF6-1-72-403-91 制造商:Sensata Technologies 功能描述:1 Pole
APGF6-30479-50 制造商:Airpax 功能描述:CIRCUIT PROTECTOR HYD MAGNETIC 制造商:Sensata Technologies 功能描述:APGF6-30479-50 /Pole # 1 /Prod Family: 0207
APGH111-1-41-102-91 制造商:Sensata Technologies 功能描述:Circuit Breaker Magnetic Circuit Protectors 3Pole 1A
APGH111-1-41-203-91 制造商:Airpax 功能描述:Circuit Breaker Magnetic Circuit Protectors 3Pole 20A 制造商:Sensata Technologies 功能描述:Circuit Breaker Magnetic Circuit Protectors 3Pole 20A